Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.
Overview
PS-AC2488T3-2U is a 2U integrated power supply for substation video surveillance, delivering AC 24 V, DC 24 V and DC 12 V outputs at 8 A per group. Built to the procurement standard for grid video surveillance systems.
One chassis supplies the three voltages used by a substation camera site: AC 24 V for PTZ heads and domes, DC 24 V for industrial cameras, and DC 12 V for ancillary equipment. Each group is rated 8 A and independently protected.
The transformer design gives low magnetising current, low no-load loss and lower operating noise than a switching supply of the same rating, which suits equipment that stays energised in standby for long periods.
Typical applications
- Substation video surveillance
- Grid auxiliary control rooms
- Mixed-voltage camera sites
Specifications
| Model | PS-AC2488T3-2U |
|---|---|
| Input | AC220V/50HZ |
| Output | AC24V 48 A, DC24V 24 A, DC12V 24 A (AC24V 8 A x 6; DC24V 8 A x 3; DC12V 8 A x 3 - 12 groups in total, independent outputs) |
| Number of output terminals | 12 groups |
| Total power | ≈2100 W |
| Dimensions | 433 × 360 × 88 mm (standard 2U) |
| Net weight | 20KG |
| Power supply type | 19-inch standard rack-mount, 2U, front-panel LED voltage indicator |
| Functions | Independent fuse, status indicator and switch per group |
| Applications | Power supply for PTZ units, cameras, high-speed domes, detectors and IR illuminators in low-voltage systems, and for other detection equipment |
| Output voltage adjustment | Factory-configurable to AC26V or other DC ratings; please order in advance |
| Fuse rating | AC220V input, 25 A |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other Other models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.