Overview
2U rack-mount supply with dual redundant modules in 200 W, 350 W or 450 W versions at 12 VDC. The standby module takes over automatically if the main module fails.
Two power modules share the load in hot standby. Changeover is automatic, so a module failure does not interrupt the output. An optional fire-alarm forced-disconnect input drops the output on a fire signal.
Each output group has its own switch, fuse and status LED, and both front and rear panels carry LED voltage indication. Higher power ratings can be built to project requirements.
Typical applications
- Critical surveillance systems
- Access control with battery-backed locks
- Fire and life-safety ancillary loads
Specifications
| Model | PS-DC1217D-16A-2U (200 W example) |
|---|---|
| Input | AC220V/50HZ |
| Output | DC200W + DC200W, output DC12V/17A |
| Dimensions | 433 × 360 × 89 mm (standard 2U rack-mount) |
| Net weight | 9KG |
| Power supply type | 19-inch standard rack-mount, 2U, independent LED indicators on the front and rear panels |
| Functions | Independent switch, status indicator and fuse protection per group |
| Protection features | Overvoltage, overcurrent, overtemperature and short-circuit protection |
| Applications | Power supply for PTZ units, cameras, high-speed domes, detectors and IR illuminators in low-voltage systems, and for other detection equipment |
| Total output power | DC200W + DC200W, output DC12V/17A; power can be switched remotely over the network; RJ45 network port |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC12V models
DC12V Weatherproof Outdoor Camera Power Supply, PTZ Dome
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.