Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.
Overview
PS-AC2425-10-2U is a 2U rack-mount video security power supply: ten independent AC 24 V outputs, 25 A total and 600 W, in a standard 19-inch chassis with front and rear wiring access.
Ten AC 24 V outputs at an average of 2.5 A each feed cameras, speed domes and pan-tilt heads from one chassis instead of scattered adapters. Each output has its own switch, fuse and LED, the front panel carries a digital voltmeter, and the input side can be built with dual AC 220 V feeds and automatic main/standby changeover.
For cabinets where field points are concentrated and maintenance is centralised, the whole distribution and inspection routine stays inside the rack: a single-channel fault is traced by port number rather than by climbing up to a ceiling adapter. The series is in volume use on major projects, including more than 1,000 units at a single airport site with no returns, and has been exported in multiple OEM batches.
Typical applications
- AC 24 V cameras, speed domes and PTZ heads
- Video surveillance cabinets
- Large campus and transport projects
Specifications
| Model | PS-AC2425-10-2U |
|---|---|
| Input | AC220V/50Hz (AC110V input or other ratings available on request) |
| Output | AC24V 25 A (600 W total) |
| Dimensions | 433 (W) × 360 (D) × 89 (H) mm (standard 2U height) |
| Net weight | 14 kg (weight varies with configuration) |
| Power supply type | 19-inch rack-mount power distribution unit with LED digital voltmeter on the front panel |
| Functions | Independent switch, fuse and LED status indicator per channel; 10 channels (24- or 32-channel versions, dual-redundant auto-switching, fire-alarm forced cut-off and intelligent network control available on request) |
| Applications | Centralized power supply enclosure for security surveillance: supplies PTZ cameras, high-speed domes, card readers, detectors, alarm devices, access-control systems, routers and switches in low-voltage systems, as well as other electronic equipment |
| Operating temperature and humidity | −25 °C to 65 °C; humidity below 90%; relative humidity 5%–95% (non-condensing) |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other AC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.