Rear panel — terminal numbering, master switch and AC inlet.
Overview
PS-AC2412-24-2U is a 2U rack-mount centralized power supply for AC 24 V loads (the standard voltage for speed domes and pan-tilt heads). 300 W / 12 A total, 24 independent outputs at about 12.5 W each.
AC 24 V is the standard supply for speed domes and pan-tilt cameras and is driven directly from an AC transformer, with no rectifier stage. The unit supplies 300 W across 24 independent outputs at roughly 12 A total, in a standard 2U 19-inch chassis.
The 2U height allows it to sit alongside cable managers and deeper equipment in the same cabinet, and the chassis is designed for front-to-rear ventilation. Outputs are terminated at the rear and numbered per channel for point-by-point checking and later expansion.
Typical applications
- AC 24 V speed domes
- Pan-tilt heads
- High point-count surveillance cabinets
Specifications
| Model | PS-AC2412-24-2U |
|---|---|
| Output type | AC24V |
| Rated output voltage | 24V |
| Rated output power | 300W |
| Rated output current | 12 A (total output current) |
| Output channels | 24 channels (fully independent) |
| Nominal power per channel | 12.5 W (total power ÷ channels) |
| Module configuration | 300 W (1 module) |
| Chassis type | 2U standard 19-inch rack-mount |
| Mounting | 19-inch rack mounting with front-to-rear airflow |
| Operating temperature (ref.) | 0 °C to +40 °C ambient (subject to the actual datasheet) |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other AC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.