Overview
PS-AC2429-24-2U 24-Channel PTZ Camera Power Supply, AC24V 700 W is a rack-mount centralized power supply for low-voltage security devices, built in a standard 19-inch chassis with independent outputs and per-channel protection.
Specifications
| Model | PS-AC2429-24-2U |
|---|---|
| Input voltage | AC220V/50Hz |
| Output type | AC24V |
| Rated output power | 700W |
| Rated total output current | 29A |
| Output channels | 24 channels (fully independent) |
| Nominal power per channel | 29.17W (700W ÷ 24 channels, evenly divided) |
| Nominal current per channel | 1.22A (700W ÷ 24V ÷ 24 channels, evenly divided) |
| Module configuration | 700W (1 module) |
| Chassis form factor | Standard 19-inch 2U rack mount; independent LED voltage indicators on front and rear panels |
| Dimensions | 433mm × 360mm × 89mm |
| Front/rear cable entry | Cable entry from either front or rear panel; 24 outputs numbered by channel |
| Per-channel protection | Independent switch and status indicator per group; PTC resettable fuse per channel, so a single-channel overload trips only that channel |
| Protection features | Overvoltage, overcurrent, overtemperature and short-circuit protection |
| Powered devices | AC 24 V PTZ domes and pan-tilt cameras (including high-speed domes), centrally powered from the equipment room |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other AC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.