Beijing Ruiyixing Technology Co., Ltd.ccve365@qq.com·(010) 6053 0441·中文
RyCCVE365Request a quote
Technical articles ·

Low-Voltage Centralized Power for Projects: Estates to Airports

KEY TAKEAWAY

One supply feeds all cameras and readers instead of point adapters. Multi-device sites use PS-AC2488T2-2U, substations PS-AC2486T3-2U with 12 groups at ~1800 W.

In low-voltage engineering, centralized power means one supply (or a few) distributing power to every front-end device, replacing an adapter at each point. This article compares it with the alternatives and sets out what a scheme has to contain.

1. What centralized power is

A centralized supply — rack-mount or wall-mount — sits in the low-voltage room or cabinet and feeds many cameras and access-control devices over dedicated cable. The benefits: fewer distribution points, simpler maintenance and surge protection, and one place to connect a UPS when the site loses mains power.

2. Centralized versus individual versus PoE

ApproachCablingMaintenanceFits
Individual adaptersPower taken at each point, many cablesMany failure pointsFew points, difficult retrofit
CentralizedOne distribution point, tidy runsManaged centrallyMedium and large CCTV or access control
PoEVideo and power on one network cableSimplestNew cabling, PoE cameras

3. What the scheme contains

  • The supply. Chosen by voltage — rack-mount for many channels (for example PS-DC1229-16A-2U, 16 channels at 350 W) or wall-mount where there is no cabinet (for example a DC12V 25 A 16-channel unit).
  • Distribution and cable. Wired channel by channel, with cable gauge chosen for the run.
  • Voltage-drop check. On long runs the voltage at the far end must be calculated — see How far can centralized power reach.
  • Backup. Critical systems add dual backup (such as a dual-backup rack-mount supply) or a UPS.

4. Where it is used

Housing-estate CCTV, industrial-park security and utility substations all suit centralized power. Substations commonly use a combined supply (PS-AC2488T2-2U) to feed PTZ domes, fixed cameras and auxiliary control from one chassis; large sites use high-channel rack units such as PS-DC1248-24-2U (24 channels, 600 W). Channel counts are worked out as described in How many cameras can one supply feed.

5. Frequently asked questions

Does a centralized supply mean everything fails at once?

The supply itself is the critical point, which is why dual backup or a UPS is used to reduce the risk. Per-channel fusing also limits how far a single fault can spread.

Can centralized power be used to upgrade an existing site?

Yes, but the existing cable gauge and the resulting drop have to be checked. Where the drop is too large, either step the voltage down locally or replace the cable with a heavier gauge.

Need a model matched to your project?

Send the voltage class, device count and total load — we will confirm the model and the power headroom.

Request a quote