Beijing Ruiyixing Technology Co., Ltd.ccve365@qq.com·(010) 6053 0441·中文
RyCCVE365Request a quote
2U 10-Channel Camera Power Supply, DC12V 58 A, 700 W
Home / Products / DC12V

2U 10-Channel Camera Power Supply, DC12V 58 A, 700 W

10 independent outputsOutput channels
700WTotal power
2U standard 19-inch rack-mountForm factor

Overview

2U rack-mount CCTV power supply with ten independent 12 VDC outputs, 58 A total current and 700 W total power. Standard 19-inch 2U chassis with wiring access from both the front and the rear panel.

Each of the ten outputs is switched, fused and monitored by its own LED. The DC output is adjustable from 12 to 14 VDC, which is normally set at the factory. Output terminals are grouped per channel and fitted with protective covers so wiring can be added to spare branches without pulling the unit out of the rack.

The chassis accepts AC 220 V input and is intended for cabinets where camera, PTZ and alarm wiring is terminated centrally. Rack power supplies of this series are in volume use on projects at home and abroad, including multi-batch OEM exports.

Typical applications

  • CCTV cameras and PTZ domes
  • Perimeter alarm and access control
  • Fire and communication equipment in low-voltage rooms

Specifications

Output typeDC12V (mixed DC24V / AC24V output groups available on request)
Output channels10 independent outputs
Total output current58A
Total output power700W
Per-channel configurationIndependent switch, fuse and LED indicator per channel
Output voltage adjustmentDC12V–14V adjustable; preset at the factory on request
Output terminals9500 terminals with protective covers; multiple wiring configurations
CoolingThermostatically controlled fan starts automatically at a preset temperature (optional)
Power modulesImported-brand switching power supply modules
Chassis type2U standard 19-inch rack-mount
Front/rear cable entryBoth front and rear panels accept wiring; connect to a spare branch in place without pulling the unit out of the rack
Powered devicesSurveillance cameras, PTZ speed domes, perimeter alarm, fire-protection and communication systems
Application scenariosCentralized power for surveillance cameras, PTZ units and alarm devices on the low-voltage side, replacing point-by-point power adapters

Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.

Ask about this model

Send the required channel count and load per device — we will confirm the configuration and headroom.

Email us