Overview
Converter that steps AC 24 V or DC 24 V down to a regulated 12 VDC output at 3 A, with 90% efficiency in a compact IP65 aluminium housing.
Some low-voltage projects permit only AC 24 V or DC 24 V at the field position and do not allow AC 220 V, while sending 12 VDC over a long run would lose too much voltage. This converter is placed at the far end to deliver a stable 12 VDC to the camera.
The die-cast aluminium housing is sealed to IP65, so the unit can be mounted outdoors or in damp plant rooms. Input voltage must stay within the specified range; an over-range input will damage the module.
Typical applications
- Long-run 12 VDC camera feeds
- Conversions from AC 24 V or DC 24 V
- Outdoor and damp locations
Specifications
| Model | JLDC12S03 |
|---|---|
| Input voltage | AC15–28V or DC24V |
| Output voltage | DC12V |
| Output current | 3A |
| Efficiency | 90% |
| Protection | Output overload / short-circuit protection |
| Enclosure | Extruded aluminium alloy |
| Dimensions | 75*66*18(mm) |
| Mounting hole spacing | 63(mm) |
| Protection standard | IP65 |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.