Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.
Overview
PS-DC2414-8-1U is a 1U rack-mount centralized power supply for 24 VDC loads (a common industrial control voltage). 350 W / 14 A total, eight independent outputs at about 43.8 W each.
Distributing 24 VDC reduces the conductor cross-section required, which saves cable cost on long or widely spaced camera runs. The unit supplies a regulated 350 W across eight independent outputs at roughly 14 A total, in a standard 1U 19-inch chassis.
The 1U height suits wiring closets and risers where vertical space is limited. Terminals are arranged by channel number at the rear of the chassis, so circuits can be connected and checked one group at a time, reducing the chance of mis-wiring.
Typical applications
- PTZ heads and speed domes
- Industrial-grade cameras
- Wiring closets and risers
Specifications
| Model | PS-DC2414-8-1U |
|---|---|
| Output type | DC24V |
| Rated output voltage | 24V |
| Rated output power | 350W |
| Rated output current | 14 A (total output current) |
| Output channels | 8 channels (fully independent) |
| Nominal power per channel | 43.75 W (total power ÷ channels) |
| Module configuration | 350 W (1 module) |
| Chassis type | 1U standard 19-inch rack-mount |
| Mounting | 19-inch rack mounting with front-to-rear airflow |
| Operating temperature (ref.) | 0 °C to +40 °C ambient (subject to the actual datasheet) |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.