Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.
Overview
PS-DC1220-1U is a 1U rack-mount CCTV power supply with eight independent outputs, 12 VDC 20 A and 240 W total power in a standard 19-inch chassis. Mounting ears are detachable and terminals are accessible from both the front and the rear panel.
Input is AC 180-240 V / 50 Hz with a switch-selectable 110 V range. Output is adjustable from 11 to 14 VDC and calibrated to the nominal voltage at the factory; a front-panel LED digital voltmeter reads the live value on site. Each output has its own switch, fuse and LED indicator. The unit withstands a 300 VAC surge input for 5 seconds and provides short-circuit, overload, over-voltage and over-temperature protection. Every unit is 100% full-load burn-in tested.
The 19-inch 1U chassis has detachable ears, so it can be mounted at the front or the rear of the cabinet. Both input and output terminals are duplicated front and rear: once the unit is racked, wiring can be completed from the front panel without reaching around to the back, and additional circuits are added the same way.
Typical applications
- CCTV cameras and low-voltage front-end devices
- Cabinets with restricted rear access
- Retrofit and expansion projects
Specifications
| Model | PS-DC1220-1U |
|---|---|
| Input voltage | AC180–240V/50Hz (110V input optional) |
| Output voltage | DC12V (adjustable 11–14 V) |
| Output current | 20 A (240 W total) |
| Dimensions | 1RU*200*480 |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC12V models
DC12V Weatherproof Outdoor Camera Power Supply, PTZ Dome
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.