Overview
Twelve-channel rack power sequencer with thirteen outputs (12 controlled plus 1 direct), a TFT colour display and a 60 A / 13 kVA capacity for equipment rooms.
The unit brings equipment up and down in a set order, which avoids the inrush current that trips breakers when a whole rack is energised at once. A 63 A two-pole circuit breaker provides overload protection, and 6 mm² input wiring carries the full load.
The TFT display shows operating voltage, system time, status and control state, and gives access to device ID, manual mode, power-on behaviour, backlight, channel delay, voltage protection, mode and password settings. Each of the twelve controlled outputs is AC 220 V / 13 A on universal sockets switched by 30 A relays. A standard RS-232 port with an open protocol allows control from a central controller or a PC.
Typical applications
- Equipment rooms and data closets
- AV and control centres
- Staged power-up of large racks
Specifications
| Product name | 12-channel sequential power controller for equipment rooms |
|---|---|
| Output configuration | 12 + 1 channels: 12 switched + 1 pass-through |
| Per-channel output | AC220V, 13 A, universal socket with 30 A relay |
| Total output current | 60A |
| Design capacity | 13KVA |
| Input cable gauge | 6 mm² power cable |
| Main protection | 63 A double-pole air circuit breaker |
| Control interfaces | 2 × RS232 serial, RS485, external I/O, DC5–12V voltage control, DC24V emergency start, RJ45 network port (network version) |
| User interface | TFT color display showing operating voltage, system time and status; 12 individual channel keys on the panel |
| Timing capability | MCU control; channel delay independently settable from 1 to 999 s; the timer version stores up to 63 scheduled tasks |
| Control modes | Five built-in control modes for manual recall |
| Management | Separate control and setup passwords; channels can be set to permanent power |
| Protection features | Automatic overvoltage and undervoltage protection with configurable thresholds |
| Chassis specifications | 19-inch 2U standard chassis, aluminium alloy front panel, black |
| Other options | Panel USB lamp port; optional 40 A dual-stage EMI filter (compliant with CISPR (Europe) and FCC (US) standards) |
| Notes | Supplied with PC control software for real-time control and status polling (features vary by model); engineering estimate — subject to the actual datasheet |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other Other models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.