Beijing Ruiyixing Technology Co., Ltd.ccve365@qq.com·(010) 6053 0441·中文
RyCCVE365Request a quote
PS-DC1216-10A-2U 10-Ch Access-Control Power Supply, DC12V — rear panel layout drawing

Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.

Home / Products / DC12V
PS-DC1216-10A-2U

PS-DC1216-10A-2U 10-Ch Access-Control Power Supply, DC12V

Overview

PS-DC1216-10A-2U is a 2U rack-mount supply with ten 12 VDC outputs — eight at 1.25 A and two at 2 A — in a standard 19-inch chassis with front and rear wiring access.

The split output budget matches access control hardware: eight lower-current branches for controllers and readers, and two 2 A branches for locks or strikes with higher inrush. Output is adjustable by ±10%.

Each group has its own switch, self-resetting protection and status indicator, with LED voltage indication on the front panel. Detachable ears and duplicated front/rear terminals simplify rack installation and later expansion.

Typical applications

  • Access controllers and readers
  • Electric locks and strikes
  • Door intercom systems

Specifications

ModelPS-DC1216-10A-2U
InputAC220V/50HZ
OutputDC12V 8 channels (01-08, 1.25 A each); DC12V 2 channels (09-10, 2 A each)
Dimensions433 × 360 × 89 mm (standard 2U)
Net weight7KG
Power supply type19-inch standard rack-mount, 2U, front-panel LED voltage indicator
FunctionsIndependent switch, fuse (self-resetting type) and status indicator per group
ApplicationsPower supply for PTZ units, cameras, high-speed domes, detectors and IR illuminators in low-voltage systems, and for other low-voltage equipment
Output voltage adjustmentDC output adjustable ±10%
Fuse ratingAC220V input, 5 A (one spare fuse included, marked FUSE in the input socket)

Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.

Ask about this model

Send the required channel count and load per device — we will confirm the configuration and headroom.

Email us