Beijing Ruiyixing Technology Co., Ltd.ccve365@qq.com·(010) 6053 0441·中文
RyCCVE365Request a quote
PS-DC1241-16-2U 16-Channel Camera Power Supply, DC12V 500 W — rear panel layout drawing

Rear panel layout — terminal numbering, master switch and input position. See the specifications table for the ratings of this model.

Home / Products / DC12V
PS-DC1241-16-2U

PS-DC1241-16-2U 16-Channel Camera Power Supply, DC12V 500 W

16 channelsOutput channels
500WRated power
2U standard 19-inch rack-mountForm factor

Overview

PS-DC1241-16-2U is a 2U rack-mount CCTV power supply with sixteen independent 12 VDC outputs, 500 W total power and roughly 41 A rated current, in a standard 19-inch chassis with front and rear wiring access.

12 VDC falls within the safety extra-low voltage range, so it can be distributed to camera positions that people can reach. The unit delivers a regulated 500 W across sixteen independently protected outputs; a single overloaded branch drops out while the rest continue to supply.

Outputs are numbered and laid out on both the front and rear panels, so a point can be added to a spare branch without pulling the chassis out of the rack. The unit is intended for network cameras, IR illuminators and access controllers on a shared 12 V supply, consolidating scattered adapters into one cabinet position.

Typical applications

  • Network cameras and IR illuminators
  • Access controllers
  • Medium-density surveillance cabinets

Specifications

ModelPS-DC1241-16-2U
Output typeDC12V
Rated output voltage12V
Rated output power500W
Rated output current41 A (total output current)
Output channels16 channels (fully independent)
Nominal power per channel31.25 W (total power 500 W ÷ 16 channels; derived) — engineering estimate, subject to the actual datasheet
Nominal current per channel≈2.6 A (500 W ÷ 12 V ÷ 16 channels; derived) — engineering estimate, subject to the actual datasheet
Chassis type2U standard 19-inch rack-mount
Front/rear cable entryFront and rear panel layout; 16 outputs numbered by channel
Per-channel fault isolationOn single-channel overload only that channel disconnects; the others keep supplying power
Powered devicesIP cameras, fill lights, access-control controllers and other 12 V security devices
NotesItems not stated here, such as voltage and dimensions, must be confirmed against the actual datasheet — engineering estimate, subject to the actual datasheet

Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.

Ask about this model

Send the required channel count and load per device — we will confirm the configuration and headroom.

Email us