Overview
PS-DC1266-32-2U 32-Channel Camera Power Supply, DC12V 800 W is a rack-mount centralized power supply for low-voltage security devices, built in a standard 19-inch chassis with independent outputs and per-channel protection.
Specifications
| Model | PS-DC1266-32-2U |
|---|---|
| Input voltage | AC220V/50Hz |
| Output type | DC12V |
| Rated output power | 800W |
| Rated total output current | 66A |
| Output channels | 32 channels (mutually independent) |
| Nominal power per channel | 25W (800W ÷ 32 channels, evenly divided) |
| Nominal current per channel | 2.08A (800W ÷ 12V ÷ 32 channels, evenly divided) |
| Module configuration | 350W + 450W (2 modules) |
| Output voltage adjustment | Adjustable by internal VR potentiometer; DC12V models 11.5 ~ 14 V |
| Chassis form factor | Standard 19-inch 2U rack mount; independent LED voltage indicators on front and rear panels |
| Dimensions | 433mm × 360mm × 89mm |
| Front/rear cable entry | Cable entry from either front or rear panel; 32 outputs numbered by channel |
| Per-channel protection | Independent switch and status indicator per group; PTC resettable fuse per channel, so a single-channel overload trips only that channel |
| Protection features | Overvoltage, overcurrent, overtemperature and short-circuit protection |
| Powered devices | 12 V DC front-end devices drawing 5-10 W in total, such as network bullet cameras, dome cameras and microphones |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC12V models
DC12V
DC12V Weatherproof Outdoor Camera Power Supply, PTZ Dome
AC24V for long cable runs; factory-set to site requirements
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.