Overview
PS-DC2450-24-2U 24-Channel PTZ Camera Power Supply, DC24V 1200 W is a rack-mount centralized power supply for low-voltage security devices, built in a standard 19-inch chassis with independent outputs and per-channel protection.
Specifications
| Model | PS-DC2450-24-2U |
|---|---|
| Input voltage | AC220V/50Hz |
| Output type | DC24V |
| Rated output power | 1200W |
| Rated total output current | 50A |
| Output channels | 24 channels (fully independent) |
| Nominal power per channel | 50W (1200W ÷ 24 channels, evenly divided) |
| Nominal current per channel | 2.08A (50A ÷ 24 channels, evenly divided) |
| Module configuration | 600W + 600W (2 modules) |
| Output voltage adjustment | Adjustable by internal VR potentiometer (clockwise to raise, counter-clockwise to lower) |
| Chassis form factor | Standard 19-inch 2U rack mount; independent LED voltage indicators on front and rear panels |
| Dimensions | 433mm × 360mm × 89mm |
| Front/rear cable entry | Cable entry from either front or rear panel; 24 outputs numbered by channel |
| Per-channel protection | Independent switch and status indicator per group; PTC resettable fuse per channel, so a single-channel overload trips only that channel |
| Protection features | Overvoltage, overcurrent, overtemperature and short-circuit protection |
| Powered devices | The DC input of AC/DC dual-input PTZ cameras, 24 V industrial cameras and high-power IR illuminators |
Values marked “approx.” or “est.” are engineering estimates; the physical datasheet governs for ordering. Specifications are subject to change without notice.
Other DC24V models
Ask about this model
Send the required channel count and load per device — we will confirm the configuration and headroom.